Resistor values for JP2026 TOHs
The possible resistor values and respective ID pin voltages are listed in the table below.
| Resistor value | Voltage | Reserved | Notes |
|---|---|---|---|
| 560 ohm | 0.1 V | No | |
| 2 kohm | 0.3 V | No | |
| 3.9 kohm | 0.5 V | No | |
| 6.2 kohm | 0.7 V | Yes | |
| 10 kohm | 0.9 V | Yes | The official Jolla TOHs use this. |
| 15 kohm | 1.1 V | Yes | |
| 27 kohm | 1.3 V | No | 26k7 would be closer but this is a more common value. |
| 51 kohm | 1.5 V | No | 49k9 would be closer but this is a more common value. |
| 160 kohm | 1.7 V | Yes | Close to the disconnected voltage, please don’t use. |
The voltage in the table is normative and in practice is within a few percent depending on the resistor and the device.